Bolt plates

Home › Forums › Climbing Talk › Bolt plates

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 7 March 2007 at 12:00 AM #4782 Reply
    Warren

      Can anyone out there tell me the right size bolt plates I need for WA. Went to buy some and they asked whether I needed 10mm or 12 mm. And is 90 degrees preferable over 45 degrees or doesn’t it matter?

      Oh and how can I get the code for Stratham Quarry?

      Thanks in advance for any advice.

      7 March 2007 at 12:00 AM #4783 Reply
      a wombat

        the two sizes are 12mm and 3/8″ (~9.4mm)

        for WA and all of australia you want the 12mm ones as most of the bolts are 10mm in diameter.

        generally the ones bent at 90deg are the easiest to clip.

        8 March 2007 at 12:00 AM #4784 Reply
        jamie

          90 degree are easier to clip but the 45 degree ones fit better over some bolts

          matter of preference get a selection of both

          8 March 2007 at 12:00 AM #4785 Reply
          Warren

            Thanks for your help, folks. Will probably go for mainly 90’s with a couple of 45’s thrown in….best of both worlds! 🙂

            Thanks again

            Warren

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          Reply To: Bolt plates
          Your information: