- This topic has 1 reply, 1 voice, and was last updated 10 months ago by Peter Buzzacott.
- 26 September 2019 at 11:51 am #190398Peter BuzzacottGuest
I just got back from the Nullarbor and my gear is now all red with dust. I’ll wash the rope in a large front loader, but am also contemplating giving my hardware a wash in clean water, followed by a light squirt of WD40 and a good wipe down with rags afterwards. My understanding is that petrochemicals in general are harmless to rope but when I am next using this kit in the rain it is possible any tiny residual droplets of WD40 could wash down from the carabiner gate hinge onto the rope.
Thoughts anyone?8 October 2019 at 11:35 am #190496Peter BuzzacottGuest
Okay, the crabs are all clean and lubed-up.
I gave them a good wipe down and am also reassured by these ‘pilot’ data: https://www.blackdiamondequipment.com/en_US/qc-lab-acid-harness.html
PS: I’ll be at Mountain Quarry on Sunday, on a deep purple 10.5mm Edelrid static rope. Come over and say hi if you recognise it.