Deprecated: Function jetpack_form_register_pattern is deprecated since version jetpack-13.4! Use Automattic\Jetpack\Forms\ContactForm\Util::register_pattern instead. in /opt/bitnami/wordpress/wp-includes/functions.php on line 6078
“Learning to Fly” finished! – CAWA

Home Forums Bolting “Learning to Fly” finished!

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #6446 Reply
    Richard W
    Guest

    Finally put the last 3 bolts in Learning to Fly this morning. Have left the large block there which doesn’t seem keen to move. If concerned about clipping the fourth bolt (in the middle of the block) then you can protect below and above the block with small wires/cams. As earlier mentioned, the orignal line traverses right along the crack and then up to the upper face to avoid pulling the triangular bulge. With permission from R. Masters two new bolts straight through the bulge exsist giving a direct line – to be possibly called Learning to Fly Direct!?? Either way should be an awesome testpiece for the stronger climbers in Perth. Enjoy. 12 P’s – Hilte RE500 finishing at the same double P anchor as Barren Awakening.

    #6447 Reply
    ed nepia
    Member

    legendary effort! cheers richard!!

    #6448 Reply
    Elliot
    Member

    Richard, you truly are a gift from the climbing Gods.

    Your contribution to putting up new routes around Perth and the rest of the state is very much appreciated!

    Even if I’m not good enough to climb them 😉

    #6449 Reply
    Richard W
    Member

    Thanks man – but just to clarify I only re-bolt old lines that other legendary climbers have put up long before me. Cheers

    #6450 Reply
    Owen
    Member

    Seriously – I had a wicked time this weekend on a few of the routes Ricardo and Nick have put in the hard yards on. Much appreciated amigos. Looking foward to getting reamed on this latest installment

    #6451 Reply
    Nick
    Member

    awesome, Richard has really been doing 95% of the work.

    #6452 Reply
    Nick
    Member

    awesome, Richard has really been doing 95% of the work.

    #6453 Reply
    Richard W
    Member

    Note – Nick paid out for half of the Hilti Drill! Thanks Man!

Viewing 8 posts - 1 through 8 (of 8 total)
Reply To: “Learning to Fly” finished!
Your information:




Scroll to Top