- This topic has 6 replies, 2 voices, and was last updated 16 years, 3 months ago by
.
-
Posts
-
Have bolted a new line in Mountain Quarry late last year that is an OPEN project for all – Non chipped and NOT to be chipped. From the anchor/belay of the 1st pitch of “On Edge” follow the obvious line of Fixe P’s rightwards through the grove and then directly up and over the bulge. Finish at double P anchor. Should go 26+. Enjoy.
nice work!
Credit to you for your generosity Richard. Wherever life takes you, you will be well remembered in these quarters, mate. Pity I can’t climb 26!
can’t the little wingman get his skinny arms up it ??
had a go today – very stiff -28/9 if i had to hazard a guess. i think cooler temps will see it sent…
richard, noticed that a few bolts were a bit over-sunk, meaning that there is barely enough clearance to get a draw in. just some feedback but great proj!
Ta. Have watched Nick pull the moves – he said it was pretty tough. I’m finding the different size of biners being the variable in the depth i’m sinking the bolts. I do try placing biners in the bolt as I place them and am aware that I’m on the edge of too deep. What did you think of the moves?
Yeah moves were hard. Getting to the two gastons wasnt too bad but from there we were shut down. If it were 10 degrees cooler i think we might have a better chance.
